The 7 Best Wind Turbine For Home in October 2023

[21% High Efficiency]:400W Wind Turbine Generator has a low start-up speed of 5.6mph and can withstand the maximum wind speed is 78.3 mph.Support all day power generation, with utilization rate up to 21%.Three enhanced nylon fiber blades made by precision molding make it lightweight, low noise, low vibration and durable,which solved the problem that solar panels could not work at night or when the sun is not strong enough.

[Intelligent PWM hybrid control and collocation]: 40A hybrid charging controller, equipped with mechanical unloading resistance, adopts intelligent PWM technology to prevent battery overcharge and short circuit, to ensure the safety of the system.The controller screen displays sufficient information to facilitate understanding of system electrical parameters, and a 29-foot wind generator extension cable from the wind generator to the controller is provided for daily use.

[2560WH Lithium battery energy storage]: Lithium battery is the perfect upgrade of lead-acid battery. Kit with 2*12V 100Ah Lithium Battery Rechargeable cycles more than 3000 times, a service life more than 10 years. With BMS battery protection. High efficiency of charge/discharge, possible to extend the capacity in parallel connection, easily setting up.

[High efficiency AC/ DC output]: Using advanced 24V 3000W off-grid inverter, pure sine wave design, outputs 24V DC to 110V/120V AC, 95% high conversion efficiency, make full use of battery power without waste. External switch design, extended inverter control function, 1% ultra-low no-load loss, low self-consumption, save battery power, suitable for refrigerators, air conditioners, water heaters, ovens and other household appliances

[Package includes & expandable]: Package includes 6*100W 18V single solar panel + 1*400W new wind generator + 2*12V 100Ah lithium battery + 1*3000W 24V upgraded off-grid inverter + 1* 16ft solar cable + 1* 29ft wind generator cable. Up to 4pcs 100W solar panels and 2pcs 12V 150AH lithium batteries of the same type can be added to the system.

★ Feature: Starting with low speed; high wind energy utilization; low vibration on operation, high efficiency.

★ Wind Blade: 23.4inch in length, made of nylon carbon fiber. The longer the blades are, the more kinetic energy they generate and the more power they produce. Nylon material waterproof, corrosion resistant, lightweight.

★ Generator: three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet. A fully integrated voltage regulator that automatically shuts down when the battery is fully charged. The wind generator is controlled by MPPT intelligent microprocessor, which can effectively adjust current and voltage

★Rotating Body: with yaw adjustment system, the wind direction position is automatically read and the rotor position is adjusted to capture the maximum wind energy. The tail fin is designed according to the aerodynamic principle.

★Real Parameter, Not False: Our product parameters are Real & Actual, not False. Base on designed after repeated experimental testing. Wind turbine parameters can be customized, please contact us if you have requirement.

1. Principle: horizontal shaft wind turbine generator, refers to the horizontal installation of shaft, parallel to the ground. The wind drives the blades to generate kinetic energy, which in turn drives the engine to generate electricity. Core components: blade + generator (engine) + rotating body + wind tail

2. Wind blade: 37.4 inch in length, made of nylon carbon fiber. The longer the blades are, the more kinetic energy they generate and the more power they produce. Nylon material waterproof, corrosion resistant, lightweight, high efficiency.

3. Generator: three-phase permanent magnet synchronous motor. Efficient and compact ac generator with high performance NdFeB permanent magnet. A fully integrated voltage regulator that automatically shuts down when the battery is fully charged. The fan is controlled by MPPT intelligent microprocessor, which can effectively adjust current and voltage

4. Rotating body: with yaw adjustment system, the wind direction position is automatically read and the rotor position is adjusted to capture the maximum wind energy. The tail fin is designed according to the aerodynamic principle, with low starting speed and low vibration.

5.Remarks: our products are designed after repeated experimental testing, and the parameters are real, not false. Wind turbine parameters can be customized, please contact us in time if you have any questions. Shipping time need 7-15 days

◆ Vertical magnetic levitation coreless wind turbine, small size, light weight, simple assembly, 20 years of service life and 2 years of warranty.

◆ The wind turbine blades are made of zinc-plated aluminum alloy, and the 3 blades are arc-shaped, which effectively utilizes wind resources and obtains higher power generation

◆ Small size, light weight, stable and safe, and the special control principle increases the wind speed to 2.5~25m/s, effectively utilizes wind resources, and obtains higher power generation.

◆ High efficiency, can be connected with household solar panels, LED street lights, planting rooms and other hybrid systems

◆ Our vertical wind turbine is suitable for emergency power generation for home, outdoor, factory and garden lighting.

The current and voltage regulation is effective, and the wind energy utilization rate is high. with this wind power generator you could use less power which generated from coal and other fossil fuel. Make you contribution to reduce carbon emission.

Low Start-up Wind Speed:2.5m/s(8'/s); Rated Wind Speed: 12m/S(35ft/s); Rated Speed: 800RPM/min; Wind leaf Material: PBT, 21.3 inch in length, precise injection molding blades cause low vibration, high utilization of wind energy

The generators adopts permanent magnet rotor alternator，with a special kind of stator design, efficiently decrease resistance torque. Meanwhile, wind turbines match the generators quite well to increase its reliability.

Optimized design of aerodynamic contour and structure, with yaw adjustment system, the wind direction position is automatically read, the wind turbines fetures with high power generation efficiency, breeze start, long life, corrosion resistance, waterproof performance, anti-sand

Easy to install and maintain the friendly environmental design wind turbine, this 1200W wind turbine generator kit is perfect for green windmill, homes, businesses, and industrial energy supplementation

[Curved Blade Design]This vertical axis wind turbine with curved blades design, can effectively use wind energy and maintains higher power generation. Aerodynamically designed so that the rotor runs quietly, reliably and quietly.

[Low Noise]The wind turbine with coreless generator, horizontal rotation and aircraft wing design, reduce noise to an unnoticeable level in natural environment. It will not effect on your family or neightbor life.

[High Efficiency]The wind generator at effective wind speed rang, special control principle expands the wind speed to 2.5 ~ 25 m/s, uses wind resources effectively and maintains a higher energy generation. Rotation radius of smaller rotation radius than other types of windmills, space-saving and efficient.

[Easy to Insatall]All the things you need for installation are included. Humanised and practical flange design, easy to install and maintain. DIY installation methods with all materials provided. Can be used in conjunction with solar panels.

[Multi Occasion]This vertical wind turbine generator can be used for a hybrid system with solar panels PV system for home use , LED street lamp, plant room, industrial, marine, RV, boat, farm etc.

🌺[ WIND BLADE ] The length of the wind turbine blades is 21.3 inches. The longer the blades, the more dynamic energy is created and the more power is produced. These six high-precision blades, in combination with the optimized design of aerodynamic shape and structure, can improve the electricity production.

🌻[ SUPERIOR MATERIAL AND DURABLE ] 1200W wind generator is made of high-quality plastic and metal, corrosion-resistant and lightweight. It adopts a three-phase AC permanent magnetic synchromesh generator, which operates freely, with low noise and long service lifespan. The wire of the wind machine is resistant to high temperature, and it is not easy to damage the wire when the machine is overloaded. It runs smoothly and has excellent wind resistance with double-row bearings.

🌹[ EXCELLENT HEAT RESISTANCE ] The coil of the wind turbine is made of special electric wire and is resistant to high temperatures. It will have an effective regulation of current and voltage, with low starting speed, but a high coefficient of wind energy usage and an eminent contribution to energy output.

🌷[ WIDE APPLICATIONS ] This wind turbine is easy to install and maintain and is suitable for a multitude of recreational activities, well known for charging the batteries of vessels, pavilions, cabins or mobile homes, but also for complementing green windmills, household, business and industrial energy sources.

🌼[ AFTER-SALES SERVICE ] If you have any question about the Wind Turbine Generator Kit, please contact us by email. We will reply your email within 24 hours and give you the perfect after-sales service. If you don’t like the item after you receive it, you can return it and we will handle it for you at once.