The 9 Best Rifle Bipods in October 2023

Offers serious strength and versatility

Lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer

Aesthetically pleasing, low-profile design conceals its mechanisms and hardware

Optimized for rapid one-handed adjustments

Quickly and quietly transitions between countless user configurations

Made of LIGHTWEIGHT MIL-SPEC hard anodized 6061 T-6 aluminum and Injection-molded polymer; aesthetically pleasing, LOW-PROFILE DESIGN conceals its mechanisms and hardware, smoothly brushing off Snags and bumps

Optimized for RAPID ONE-HANDED ADJUSTMENTS; quickly and quietly transitions between countless user configurations

Easily loaded with STABILIZING FORWARD TENSION without fear of failure or warping; at just over 11 ounce , The Magpul bipod is LIGHTER THAN MANY PRICIER BIPODS currently on the market

SPRING-TENSION LEGS stow neatly forward and snap down and lock into place with ONE HAND; LEG EXTENSIONS slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents

An INDUSTRY-EXCLUSIVE 50° of TOTAL TILT and 40° of TOTAL PAN are Controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots

Adjustable leg length (5 settings) with return Springs, you could adjust the length to meet different needs when hunting.

Press the button,the legs can eject fully and quickly.The length of legs can be adjusted from 6-9 inches.

Made of hardened steel and aluminum, non-rust black anodized finish, the bipod is duty and light weight.

Durable with new design high quality that you can quickly attaches to sling swivel stud.

Applicable for sling swivel stud rifle. No adapter.

Compatible with 1913 Picatinny Rails with Swivel Adapter: The bipods work with 1913 Picatinny rails and can be quickly attached and detached using the swivel stud. By loosening/tightening the locking knob, it can be tilted +/-20° (40° total) and it can drive to rotate 360°. It features a full tilt functionality while maintaining the ability to lock the pan at 0°.

Special Design: The folding design allows the legs snap down and lock into place with one hand within 1s that brings innovation in ergonomics, functionality, strength and value together. It is strength and durability make it ideal for harsh field conditions. Stainless steel internals and injection molded reinforced polymers ensure years of reliable performance and dependability while reducing weight, just 12 ounces, extreme stability in build. Designed for streamlined storage until deployment.

7 Height Settings: Six slots on each leg allow for 7 different height settings. The legs extend a full three inches, from 8" to 11". When folded, the housing and legs fit neatly under the barrel and are just under 2.36" deep, 3.94" wide and 7.5'' tall. While hunting or shooting, the length could be adjusted to meet your needs. The bipod can be stowed neatly forward and snap down by pressing the release button on the outside. The leg extensions slide and lock securely with the push of a button.

Rubber Feet: High quality rubber on the bottom of the legs makes the bipod shockproof and skid-resistant. Rubber feet attached to the bipod for hunting locking knob allows for a comfortable forward rest when folded. Moreover, its staggered soft rubber feet are easy to remove with a roll pin punch and hold fast to a variety of shooting surfaces, which smoothly prevent snags and bumps. With the forward tension in the shooting position, it's easily loaded without being prone to warping or failure.

Buy with Confidence: This bipod is made of hardened steel, aluminum, and is completeld using a non-rusting black anodized finish. The durable material and excellent build quality gives us the confidence to provide you with a lifetime warranty. If you have any questions or any parts are damaged when used, please feel free to contact us.

【High Quality】：This bipod is made of hardened steel and aluminum, non-rust black anodized finish; the bipod is duty and light weight and it can attach to swivel stud.

【Stable Bipod】：Our bipod will allow the shooter to compensate for ground that is unlevel by up to 20 degrees.

【Adjustable Legs】：With a touch of button, the leg of bipod will instantly spring out from 6-9 inches. The legs are notched for easy indexing to a specific height.

【Safety Protection】：Forend pads of our bipod prevent from scratching meanwhile increase the friction. Soft rubber feet provide enhanced stability. Spring control helps the bipod quickly deploy and lock into place.

【Easy to Use】：This bipod is equipped with quick lock lever, and the tension knob can be easily controlled.

High &low temperature resistance,corrosion&fatigue resistance.Lighter, stronger.

Carbon fiber bipod can be used to any environment, it can hold the rifle more stably and shoot more accurately.Carbon fiber is "soft outside and strong inside", the weight is lighter than metal aluminum, but the strength is higher than steel.

The surface of the carbon fiber bipod is more slippery, It feels better and experiences better, brings you unprecedented ease.

Adjustable leg length (5 settings) with return springs, you could adjust the length to meet different needs when hunting.

Comes with mounting adapter and hex wrench, easy to install

Lighter, stronger-Carbon fiber is "soft outside and strong inside", the weight is lighter than metal aluminum, but the strength is higher than steel.

High &low temperature resistance,corrosion&fatigue resistance-Carbon fiber bipod can be used to any environment, it can hold the rifle more stably and shoot more accurately.

Better hand feeling-The surface of the carbon fiber bipod is more slippery, the pattern looks more stylish. It feels better and experiences better, brings you unprecedented ease.

Easy installation-It comes with picatinny adapter and hex wrench, easy to install

Adjustable leg length, return sprping- Adjustable leg length (5 settings) with return springs, you could adjust the length to meet different needs when hunting.

[Fast & Easy to install] :Put the adapter into the M-rail and tighten it by hex wrench, loose the thumbscrew and connect the stud of the adapter to the bipod clamp, tighten the thumbscrew.

[Hight Quality] :This rifle bipod is exceptionally sturdy, which is made of aluminum alloy and hardened steel with non-rust black anodized finish.

[Spring-tension legs] :The bipod can be easily extended from 6’’ to 9’’ by pushing the lock attached to the leg. The safety lock would secure your bipod tightly without accidently releasing

[Separated Design] ：Our CVLIFE bipod is designed for M-rail system, the adapter is separated from the the bipod in order to detach it or install it flexibly.

[Separate accessories] ：Mount accessories can be puchased separately on Amazon.Just search:B07VSZFPMP.

【Swivel & Tiltable】This bipod is suitable for prone or bench press shots on the ground or on a table, and works with the picatinny rails, can be locked with a hex wrench. By loosening/tightening the bottom knob, it can be tilted 20° left and right, and can be driven to rotate 360°. It has full tilt functionality while maintaining the ability to lock pan at 0°.

【Special Design】Made of aluminium and injection moulded polymer, easy to install and lightweight. The folding legs design allows the legs to quickly go down and lock into place with one hand in less than 1 second. The strength and durability of the bipod make it ideal for harsh field conditions and the structure is extremely stable.

【5 Height Settings】Each leg has 6 groove bayonet locking heights. Legs extend from 7.6 inches to 10.8 inches. Different heights can be adjusted to suit various terrains to suit your hunting or shooting needs. Pressing the silver button on the side to neatly stow the legs of the bipod forward.

【Nonslip Rubber】The bottom of the legs is made of high-quality rubber, which makes the bipod shock-proof and non-slip. In addition, its circle-type soft rubber feet are not easy to stick to mud and are firmly fixed on various shooting surfaces.

【Guarantee & Support】Our products are all packaged in a box and you will receive a perfect bipod with a hex wrench included. Durable materials meet your need. Our professional support is your strong back up.