Best 11 Parallel Clamps of 2023

Features multiple clutch disks made from hardened and plated round edge high carbon steel

Steel bar dimensions of 1-3/16 in. by 3/8 in. and a 24 in. maximum opening

Clamping face dimensions: 3-7/8 in. height by 1-7/8 in. width

Clamping force of 1,500 lbs. with a load limit of 1,000 lbs.

Distributes pressure over large surface area to ensure firm grip and protect workpiece

Maximum opening capacity is 36 inches.

Heavy-duty steel jaws and high-carbon steel bar for up to 1500 lbs. of clamping force.

A reversible head enables spreader clamping and a clamp stand provides easy adjustments, while the maple handles won't wear down your hands.

Reinforced steel and castings protected by orange plastic add strength to the jaws.

Ideal for a wide range of woodworking such as panel glue-ups, boxes, cabinets, frames and raised panel doors.

Two (2) 31" KRE3531 clamps: 31" of clamping capacity, a 3-3/4" throat depth, a 10" to 36-1/2" spreading capacity, and up to 1700 lbs. of clamping force!

Newly-designed 2-part handle can receive a hex key or driver in its end to provide more clamping force if desired, or just easier clamping for those who have issues with wrist strength.

Improved operating jaw design means once you put it in place, it stays in place and is ready for clamping.

Comes equipped with three removable pressure caps for the clamping surfaces that are glue-, paint-, and solvent-resistant and help provide protection for delicate work-pieces; and two adjustable and removable work-piece supports on the bar prevent any contact between the bar and your project.

Easily converts to spreader without tools!

Heavy duty premium parallel clamping tool rated at 1700 lbs. of nominal clamping force

German high-quality profiled steel rail stock

Jaws clamp at accurate 90° angles

Easily converts to spreader without tools

Many accessories and replacement parts available

Large parallel clamping surfaces

Heavy duty premium parallel clamping tool rated at 1700 lbs. of nominal clamping force

German high-quality profiled steel rail stock

Jaws clamp at accurate 90° angles

Easily converts to spreader without tools

Many accessories and replacement parts available

Large parallel clamping surfaces

Replaceable protective pads on the jaws

Strong And Even: 3.5-Inch-Wide Padded Jaw Provides Constant, Even Pressure Without Damaging Material And The Passive Lock Jaw Stays In Place When Winding The Clamp

Perfect Pressure: Not Too Loose, Not Too Tight, Just Right With 1,100Lbs (500Kg) Of Clamping Pressure

Rock-Solid Stability: The Parallel Clamps Versatile Uses And Stability Will Help You To Deliver A Superior Finished Product You Can Be Proud Of

Easy-Grip: Large Easy-Grip Handle Makes It Easy To Lift And Slide Jaw Up And Down

1100 lbs. (500 kg) of clamping pressure

3.5-inch wide padded jaw provides constant, even pressure without damaging material

Passive lock jaw stays in place while winding clamp

Large, easy-grip handle makes it easy to lift and slide jaw up and down

Designed based on end-user feedback

3.5-Inch Wide Padded Jaw Provides Constant, Even Pressure Without Damaging Material And The Jaw Stays In Place When Winding

1,100Lbs (500Kg) Of Clamping Pressure

Large, Easy-Grip Handle Makes It Easy To Lift And Slide Jaw Up And Down

Passive Lock Jaw Stays In Place While Winding Clamp

Includes: (two) piece 24-inch parallel jaw Clamp set

Application: using a deep 3-3/4” throat depth for optimized pressure distribution and a powerful clamping force of over 1,100lbs, these parallel jaw bar clamps will make your woodworking, furniture and table top glue-ups much easier

Premium design: Each clamp features an ergonomic soft grip handle, cold Steel rail, three removable jaw pads that are non-marring and possess Rapid action movement, and an easily convertible Clamp spreader tool

90 Degree angle: Clamp provides high precision clamping at 90 Degree angles, keeping your material and work pieces square and free from movement

Versatility: Whether your project requires evenly applied clamping pressure, A secure locking system, or even the use of a quick bar clamp spreader – You’ll have a firm grip of it all with this convenient tool

Parallel jaws are designed to clamp at a nominal 90° angle

Mid-sized parallel clamp, rated at 900 lbs. of clamping force

Ideal for cabinetry or case work

Large parallel clamping surface with replaceable protective jaw pads

Large and easy to turn wood handle

Jaws clamp at accurate 90 degree angles

Easily converts to spreader

18-Inch capacity, 3-1/4-Inch throat depth parallel jaw bar clamp

Removeable end stop allows reversing the operating head to convert from compression force to spreading force

Slide on plastic jaw protector pads can be removed for cleaning and replacement when worn

Plastic rail protector pads isolate the clamp material from the steel rail to minimize any contact between clamped material and steel rails which helps avoid discoloration stining that can occur with some wood, glues and steel contact

High clamping force (900 lbs) to weight (2.8 lbs) relationship for verstile clamping and light weight