10 Best Rated Circular Saw Guide 2023

Make rip cuts and crosscuts up to 24" Wide

Cut multiple pieces to the same size With just one setup

Use the oversize edge guide for precise control throughout the cut

Rip, crosscut, and make angled cuts up to 50" Long in plywood, MDF, and panels

Simply align the guide Track with your marks to make accurate cuts

Hold track in place without clamps thanks to anti-slip guide strips

Circular Saw Guide For Large Sheets: The Bora Clamp Edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw

Clamps Firmly: This straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won’t leave indentations and is easily adjustable to meet the length of your project

Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use

Use With Any Circular Saw: This guide is compatible with any brand of circular saw, not just Bora Tools. Use it with circular saws, routers, and jigsaws. For big projects, easily increase the length up to 100 in. by adding the Bora NGX 50-inch aluminum extension

Clamping end moves with handle for easy adjustability from one side

Locking handle grabs work surfaces for a secure grip that won’t budge

Made of heavy-gauge, rigid aluminum for extreme durability

Use with circular saws, routers, Jig saws, and other portable power tools

Includes Bora NGX 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors

Includes two 50 in. cutting guides; joiner bar allows expansion to 100 in.

Low-profile design guides any circular saw, sabre saw, router, or utility knife

Made of durable, high-grade anodized aluminum

Includes C-clamps to easily attach to your work surface for stability when cutting

Break-down design makes for easy storage

A terrific value, backed by 1-year limited

Rip fence for use with DEWALT circular saws including models DWE575, DWE575SB, DWE364, DWS535, DW384

Provides smooth, precise results

simple to fasten and designate distance from blade to fence

Easy attaching by inserting through slots at front of shoe and tightening screw

Ruggedly crafted from all metal for long life

Note: This item is not compatible with ALL DEWALT circular saws.

Crosscut and rip cut material up to 8 feet (244cm)

Aluminum guide rail leads cuts precisely along a straight line

Cutline indicators help position cuts perfectly

Get It Straight Every Time: This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. It’s long 100-inch length allows you to saw with precision and skill

Locked In: The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won't budge while you cut

Make Measuring Easy: The WTX Clamp Edge has a ruled edge with both metric and imperial measurements to make your job of getting perfect cuts quick and easy

Suited For Your Needs: The modular design allows for additional extensions to be added to expand your cutting length up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts

Additional Accessories: The BORA WTX Saw Guide System has additional accessories including the Saw Plate, Track Clamps for cutting any angle, and the Router Guide

100 Inches Of Cutting: With your purchase you will receive a 50" WTX Clamp Edge and WTX 50" Extension, connect the pieces together for 100 inches of straight cuts

Track Saw Precision: Making straight cuts with a circular saw, router, or jigsaw is a challenging task, but with the BORA 5-PC NGX Clamp Edge System it is quick and easy to break down sheet material and rip boards with clean, accurate cuts every time

100” of Cutting Capacity: The NGX 50” Clamp Edge is made of heavy-gauge, extruded aluminum that clamps tightly on everything from plywood to dimensional lumber. And for big projects, like a rip cut on a 4x8, increase the length up to 100 inches with the NGX 50” aluminum extension.

Stop the Guesswork: Effortlessly attach the NGX Saw Plate to your right- or left-handed saw with the adjustable quick-release clamps. A fixed center molded channel helps reduce blade offset and the aluminum guide rails position your saw to make precision cuts.

Reduce Tear Out: Prevent top edge tear-out and splintering with two rolls of 55-inch Self-Adhesive Non-Chip Strip. Attach it to the bottom of the NGX Clamp Edge for a smooth finish

One tool, countless uses: the Bora QuickCut does the work of multiple tools, All with one useful saw guide. The multiple angles on this circular saw accessory eliminate the need for a miter saw or more complex jigs. Cut wood or soft metals with unrivaled precision at four preset angles: 22.5°, 45°, 60°, and 90°.

Mark, measure, and cut with ease: save yourself the calculations of a typical tri-square with bora’s advanced cut guide. Measure perfectly flush angles for framing and crown molding, without doing the math. The ruler also features imperial and metric measurements.

Easy grip: The large, curved handle provides extra comfort and precision. With the QuickCut, you can get a firm hold on your circular saw without your edge guide slipping.

Durable: Bora’s QuickCut saw guide is made with strong aluminum extrusion and conveniently placed ruler marks. It's 16 inches long, with a 14-inch (35.5cm) guide rail for making long, straight cuts.

Bora Quality: Bora tool is a leader in innovative power tool accessories that make your jobs and projects run smoothly.