Best 9 Car Subwoofers of 2023

Rockville WHEEL OF BASS 8" 500w Slim Under-Seat or Trunk Mounted Powered Car Subwoofer.

Enclosure is very shallow at only 3.15” tall so it can fit anywhere. You can fit it under seat but it also sounds great and takes up little space in your trunk.

Enclosure is made out of solid cast aluminum. Peak Power Handling: 500 Watts. RMS Power Handling: 125 Watts. Heavy Duty Mounting Feet. PWM MOSFET Power Supply.

Low Level RCA Input. High Level Inputs with Auto Turn-On Technology. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit

Overload Protection Circuit. Green Power/Red Protect LED. Phase Switch: 0° or 180°. Low Pass Filter: 50Hz - 180Hz. Bass Boost: 0 - 12dB @ 45Hz. Built in Subsonic Filter @ 20Hz

Loaded Sub Enclosure Features: Rockville Single 10" K5 1200w Car Subwoofer Pre-loaded In Vented Sub Enclosure, Peak Power Handling: 1200 Watts, Program Power Handling: 600 Watts, CEA Rated RMS Power Handling: 300 Watts

Vent dimensions (inches): 2" x 6.5" x 8", Tuning frequency of enclosure: 35 Hz, 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire

Features of Amplifier: Rockville dB11 1400w/700w RMS 2-Ohm Class-D Mono Car Amplifier and Bass Remote, CEA Compliant Power Ratings

Peak Power Rating: (The amount of power the amplifier can produce for a split second at the loudest part of a song) - 2 Ohm: 1400 Watts x 1 Channel, - 4 Ohm: 880 Watts x 1 Channel, High-Speed MOSFET Power Supply

Features of wire kit:, Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit, (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable, 17 8 Gauge Translucent Blue SuperFlex Power Cables, 17 18 Gauge Blue Remote Cable

TWO NEW **Rockford Fosgate P2D2 12** 12" 1600 Watt 2 Ohm Punch Series Car Audio Subwoofers

**Power Handling:**

800 Watts MAX per sub (1600 watts per pair)

400 Watts RMS per sub (800 watts per pair)

Kevlar fiber reinforced paper cone

Model: SA-SSCS10 | Shallow Mount 10 Inch 500 Watt Car & Truck Audio Subwoofer Box for tight spaces

Rear Air Tight Seal Design | Power Rating: 500 Watts Max Power

High Powered 10 inch Woofers with a Non-Pressed Paper Cone and Specially Treated Foam Surround with Rubber Edge Suspension | Smooth Carpet Finish

Voice Coil: 2 inch 4 Layer Dual Voice Coil | Impedance: 4 Ohms | Magnet: 40 Ounce

Sensitivity: 90 dB | Frequency Response: 35-300Hz | Binding Post Connectors | Dimensions: 19.6" x 12.6" x 5.3" | Weight: 23.1 lbs

All in one 8"(210mm) subwoofer with small unit design to fit under most vehicle seats.

Built-in Class-AB amplifier, "All-In-One Bass Addition Package "no need for external amplifier.

Die-cast aluminum heatsink.High quality material design and craftsmanship.Supports RCA (low level) OR speaker(high level) signal input from audio source

Adjustable GAIN control to match original vehicle system, so all speakers complement each other

Easy-to-use control adjustments conveniently located on side of unit. Remote bass volume control knob

600 WATT POWER: This 10-inch car subwoofer has a power of 300 Watt RMS to 600 Watt peak that will produce high sound resonance. It also has silver-plated speaker terminals that will maximize sound quality while minimizing noise and distortion

70 OZ MAGNET STRUCTURE: Built with 70 oz. magnet and a rubber surround that will enhance car stereo or radio by producing powerful audio and unmatched performance. It comes with a sensitivity or SPL of 86.7dB to resonate perfect clarity

1.5” KAPTON VOICE COIL: The speaker subwoofer comes with a 4 Ohm impedance per coil that can be wired as 4 or 8 Ohm. The 1.5” high-temperature Kapton voice coil resists corrosion. Features a red plastic basket w/ bumped vented extended pole piece

RED ELECTRO-PLATED CONE: The red CD wave electro-plated polypropylene cone reproduces the low-end accurately for punchy, powerful bass. The wide butyl rubber surround with bumped vented pole piece keep your speaker secure and distortion-free

4.45” MOUNTING DEPTH: Easy to install w/ 4.45" mounting depth & 10.16" overall diameter, fits most audio system for cars, boats or RVs. This 10-inch, a 600-watt subwoofer will definitely give your sound system that extra kick you're looking for

Can handle a peak power 1000 watts total and RMS power 500 watts total

Polypropylene cone that is lightweight yet strong provides accurate mid and low notes for better sound quality

All-in-one complete subwoofer package compatible with any vehicle

Easy-to-install so you can enjoy listening on your favorite music right away

Dual 10" ported subwoofer enclosure for more efficiency giving you more bass output per watt

Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies

Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)

High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs

Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers

Variable Bass Boost - Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you like it

Specs – 15.5” x 11” x 3”. If you are short on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. Weight: 13 lbs.

Warranty - Sound Storm provides a powerful 3-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

CONE: Made from Polypropylene, the CXX124DVC 12-inch car subwoofer provides a resilient and durable material that can offer great sound with the advantage of long-lasting subwoofers. VOICE COIL: Our voice coils are able to withstand high temperatures yet maintain its strength and fatigue properties. Making our voice coils with this material, gives our speakers the advantage of longer pay times with lower weights

SURROUND: We use rubber in a lot of our subwoofers. It has the ability to endure much punishment without any sign of damage. It complements the whole structure of the speaker by allowing constant abuse where it is most needed, without the wear and tear. STAMPED BASKET: A Die-cast frame can absorb and transfer much of the energy produced by the speaker. It has good corrosion resistance, good mechanical property, high thermal and electrical conductivity and retains strength at high temperatures

SPECIFICATIONS: Resonant frequency - 32 Hz, Sensitivity SPL (1W/1m) - 85 Db

SPECS: Impedance – 4 Ohms, Port frequency – 34 Hz, Dimensions – 13” x 13” x 5.4”, Mounting Depth 4.8”, Mounting hole 11”, Weight – 7.8 Lbs.

WARRANTY: BOSS Audio Systems provides a powerful 3-year platinum online dealer warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality