The 8 Best Biscuit Joiner Fine Woodworking in September 2023

Powerful 5.6 AMP motor delivers 11,000 RPM for quick, precise cutting in a variety of woods

Cast aluminum pivot fence with three positive stops at 0°, 45° and 90°

Six depth settings with one-touch stops for most common biscuits sizes including #0, #10, and #20

Large and easy-to-operate cam locks for angle guide and fence adjustments

Rack-and-pinion vertical fence system engineered for accurate fence adjustments

6.5 amp, 10,000 rpm motor of the joiner tool provides power for working in the hardest woods

Dual rack and pinion fence of the plate joiner ensure blade and fence are always parallel for accurate joints every time

Integral one-piece fence of DEWALT joiner is adjustable and tilts 0-90 degree

Flush cuts can be made at 0 degree without removing fence

45-degree locating notch in fence allows indexing off the outside surface of a mitered joint

Non-marring, heavy-duty aluminum shoe allows wood joiner to be clamped for stationary work

Retractable, anti-slip pins help hold work in place

Preset depth stops for all common biscuit sizes

The joiner tool has 7.0 Amp, 120 V, AC only, 10,000 rpm

1-inch O.D. dust port of the plate joiner accepts standard bag or can be connected to a vacuum

PORTER-CABLE joiner fence tilts from 0 degree to 135 degree with positive adjustable stop at 90 degree

Precise micro height-adjustment knob

Lock-on trigger

Includes 4-inch diameter blades for standard biscuit cutting

Height scale accurate at any angle

Seven-position rotating depth stop for FF, #0, #10, #20, Simplex, Duplex, and Max (#6) biscuits

Spindle lock feature allows for single wrench bit changes

Bale handle attached to fence, not motor, for greater stability and added control during cuts

Product 1: Perfect for edge-joining panels, aligning boards, strengthening joints, and more

Product 1: Adjustable fence helps create biscuit slots at any height or angle

Product 1: Pre-set stops easily adjust to create slots for standard #0, #10, and #20 biscuits

Product 1: 8.5-amp motor rotates the 4-inch carbide-tipped blade at 10,000 RPM

Product 2: #20 sized biscuits measure in at 56 by 23 by 4 mm

Product 2: Compromised of FSC-certified birch with diagonal-running wood grain

Product 2: Expands on contact with water-based glues for maximum reinforcement

Product 2: Maximize joint strength and squareness in lumber, plywood, composite board, and more

The adjustable tilt fence can be locked in position anywhere from 0° To 90° to make quick, accurate biscuit cuts for easily joining mitered pieces. The angle knob allows you to adjust the fence angle and helps you to tackle edge-to-edge, end-to-edge and miter-to-miter

10,000 rpm motor provides power for working in various types of harder wood. The pre-set depth ( biscuit size: #20, #10, #0 and M ) helps you to cuts slots for multiple biscuit sizes. Manual mode allows you to cut custom biscuit depths

Easy to quickly set the fence angle and height, a great tool for beginner. ergonomically designed top grip handle for enhanced comfort.

Dust extractable design provides easy clean-up and an unobstructed view when in use. Biscuit joiner has suction function when the biscuit joint is using, and can keep the working area away from flying debris. Clean slots holes for better glue adhesion and longer cutter life.

The package comes with 4 inch carbide-tipped blade and 100pcs packed individually biscuits. All 100mm(4 inch) in diameter with a 22mm bore biscuit joiner blades can be used for REX031.

♕ TYPES OF JOINT：1. Corner Joint，2. Mitre Joint，3. Frame Joint，4. Centre Wall Joint，5. Butt Joint，The Biscuit Jointer Is Suitable For Joints In Solid Wood,Plywood,Chipboard,Fibreboard, Plexiglas And Artificial Marble, Etc. From 8 mm (5/16 in.) Material Thickness.

♕ DUST COLLECTION： Fit The Dust Bag To The Joiner With A Simple Push On Connection. With A Suction Function That Operates While The Biscuit Joiner Is In Use, It Will Keep The Working Area Clear From Flying Debris, Giving You The Best Possible View.

♕ SPECIFICATION：Blade Diameter: 4”，Cutting Speed: 11,000rpm，Groove Width: 5/32 Inches，Amps: 8.5A，Weight: 7.6lbs，Dimensions:17” X 14” X 5” inches.

♕ PRE-SET BISCUIT SIZES：For Convenient Use, The Biscuit Joiner Features Pre-Set Stops For The Most Common Biscuit Sizes – 0, 10, And 20. There’s Also An ‘M’ Setting, Which Puts The Tool In Manual Mode To Allow You To Cut To Custom Depths.

♕ EASY OPERATION AND 2 YEARS WARRANTY: The Adjustable Tilt Fence Can Be Locked In Position Anywhere From 0° To 90° – If you have any questions about the product, please feel free to contact us and we will provide you with 100% satisfactory solutions.

EASY TO USE - 10,000 rpm motor provides power for working in various types of harder wood. The pre-set depth ( biscuit size: #20, #10, #0 and M ) helps you to cuts slots for multiple biscuit sizes. It's easy to quickly set the fence angle and height and provide smooth cuts is an ideal tool for woodworker beginner

ADJUSTABLE FENCE AND ANGLE KNOB - REXBETI biscuit joiner has three adjustable fence positions at 0, 45 and 90 degrees to make quick, accurate biscuit cuts for easily joining mitered pieces.The angle knob allows you to adjust the fence angle and helps you to tackle edge-to-edge, end-to-edge and miter-to-miter

4 INCH CARBIDE-TIPPED BLADE AND 100pcs BISCUITS - All 100mm(4 inch) in diameter with a 22mm bore biscuit joiner blades can be used for REX031.And the package comes with 1 x 4 inch carbide-tipped blade and 100pcs packed individually biscuits

DUST COLLECTION BAG - Dust extractable design provides easy clean-up and an unobstructed view when in use. Clean slots holes for better glue adhesion and longer cutter life

ABOUT REXBETI - REXBETI wood Biscuit Plate Joiner Kit is great for you to do DIY

1010 watts, 11000 RPM, 120V/60Hz AC

Max cutting depth: 0.55", cutting angle: 0 - 45 Degree

Including one 4" 6T C2 Tungsten Carbide tipped blade