19 Best Rated Plasma Cutter Under $500 2023

PLASMA CUTTING EQUIPMENT: This versatile plasma cutting machine uses non-hazardous compressed air to cut metals. Great for stainless steel, carbon steel, copper, aluminum and more. Cutting thickness is 1/2" for Clean Cut and 3/4" for Severance Cut.

PILOT ARC: Includes integrated Matrix with Pilot Arc function to efficiently cut through rough, painted and rusty metal with less slag. In addition, the dual-voltage capability allows you to run directly on 220V 50/60Hz power, or on 110V 50Hz/60Hz.

MANY USEFUL FEATURES: This 50-Amp plasma cutter has an operating air pressure of 75 PSI at 5 CFM. It also includes a PAPST Advanced German cooling system and a MOSFET transistor, allowing you to cut thin metals or thicker metals.

COMPACT AND PORTABLE: This compact plasma cutter has a built-in handle for easy portability around your workshop or jobsite. This plasma cutter kit includes a plasma torch, ground clamp with cable, air regulator, air hose and air hose connections.

GREAT CUSTOMER SERVICE: Backed by a 3-year warranty, we're committed to after-sales service. When you contact us, you speak with real technical specialists and representatives, and our USA-based parts and customer service is available 7 days a week.

Plasma Cutter, Touch Metal get arc starting, 45Amps cutting current in voltage 220V, 35Amps Cutting current in voltage 110V. Machine with current display, range from 15 to 45Amps. Post time can be adjust from 2 to 15 seconds. Machine easy cut stainless steel, Carbon steel, Alloy, etc.

The air compressor we suggest it can supply the air 30L/min, Better 40L/min. Air gauge pre-fixed at front panel of machine, The user easy read air pressure through it. Machine also with post time function can adjust post air cooling the torch head.

We suggest the power breaker more than 35Amps If plug to 110V, Need breaker more than 30Amps if plug machine to 220V. The fan will work when needed, Means the fan only start to work if temperature reach the point. This function will reduce the dust into machine, In this way to protect the electronic parts.

This air plasma cutter is dual voltage 110/220V, It is auto indicate the input voltage, no need to switch the voltage by handle on side of machine, But still need to plug machine by hand to different power source.

Under voltage: 220V, The cutting quality cutting thickness is 6mm at 65PSI, Severance cutting thickness is 10mm at 65PSI. Under voltage: 110V, The cutting quality cutting thickness is 6mm at 65PSI, Severance cutting thickness is 8mm at 65PSI

CUT60 PILOT ARC 3 year warranty 7 day per week support in USA

PT60 blowback cutting torch WITH EURO CENTRAL CONNECTION

Blow-back start technology, Pilot Arc

60% duty cycle at 60amps, 110/220 with adapter

Continuous Pilot Arc enables you to cut expanded, rusted, painted metals

THE ULTIMATE PLASMA CUTTER - When precision metalwork cuts matter. As one of our customers said, “It will do the job very well I have had mine for almost three years and it's been very reliable.” Our 50 Amp Digital Air Inverter Plasma Cutter handles cuts up to 1/2" (Max Severance Thickness: 3/4") with ease. Designed for both demanding industrial and construction work, or home and hobby use.

MAKES THE PRECISION CUTS YOU NEED - With your Prime Weld Plasma Cutter, you can cut stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials without breaking a sweat. Have limited outlets? No problem. The diversity between 110v and 220v has you covered.

TRULY PORTABLE - If you need a portable Plasma Cutter that makes moving from project to project a breeze at a price that won’t break the bank, this is it. As another happy Amazon customer said, “For the price this plasma cutter is amazing…” Add our Plasma Cutter to your cart today and experience our high-quality product craftsmanship for yourself.

DESIGNED BY PROFESSIONALS - If you are serious about getting the job done, PRIMEWELD is a brand you can trust backed by our fanatical customer service. Our high-quality Plasma Cutters are perfect for metalwork jobs of all shapes and sizes, and our optimized design is based on state-of-the-art MOSFET transistors.

PLASMA CUTTING EQUIPMENT: This versatile plasma cutting machine uses non-hazardous compressed air to cut metals. Great for stainless steel, carbon steel, copper, aluminum and more. Cutting thickness is 1/2" for Clean Cut and 3/4" for Severance Cut.

PILOT ARC: Includes integrated Matrix with Pilot Arc function to efficiently cut through rough, painted and rusty metal with less slag. In addition, the dual-voltage capability allows you to run directly on 220V 50/60Hz power, or on 110V 50Hz/60Hz.

MANY USEFUL FEATURES: This 50-Amp plasma cutter has an operating air pressure of 75 PSI at 5 CFM. It also includes a PAPST Advanced German cooling system and a MOSFET transistor, allowing you to cut thin metals or thicker metals.

COMPACT AND PORTABLE: This compact plasma cutter has a built-in handle for easy portability around your workshop or jobsite. This plasma cutter kit includes a plasma torch, ground clamp with cable, air regulator, air hose and air hose connections.

GREAT CUSTOMER SERVICE: Backed by a 3-year warranty, we're committed to after-sales service. When you contact us, you speak with real technical specialists and representatives, and our USA-based parts and customer service is available 7 days a week.

✌Plasma cutter Pilot Arc 50Amps, Input dual voltage 115/230V, Pilot arc cutting machine,It is IGBT inverter plasma power 50/60Hz, High frequency non-touch metal arc starting The voltage lighting up at front panel automatic show input voltage 115/230V

✌Pilot arc Plasma Cutter 60% Duty cycle in 50Amps, 100% duty cycle in 40Amps under 230v, 1/2'' (14mm) max cutting thickness, 10mm quality cutting thickness in [email protected] 50A; Under 115V, it is 35Amps. Quality cutting thickness is 8mm, Severance cutting thickness 12mm in [email protected] 35Amps.

✌Pilot arc plasma cutting torch is 4 meters (include torch head), Machine with air regulator and air gauge, Also with earth clamp with 2 meters cable. torch electrode 2pcs, tip 2 pcs.

✌Machine with current display, Also with air post time adjust function, This function allow user adjust the time for post air to cool torch head.

✌Warranty, Two years warranty for this machine, the buyer can get free service within two years if machine have any problems. we have service point in American.

CUTS- Mild steel, aluminum and stainless steel from thin material to 1/4"* (6.35 millimeters) with ease! *(Mild Steel)

EASY TO USE- All you need is 120 volt power source and 1.5 CFM of compressed air. Built in regulator and air dryer make operation a breeze

DRAG TORCH TECHNOLOGY- Allows you to drag cutting tip in direct contact with the metal you're cutting for smooth consistent clean cuts

LIGHT AND PORTABLE- Forney's 120-volt 20 P Plasma Cutter is generator friendly so on the go cutting and moving to different job sites is possible

RUGGED- All metal case. Built to take the day to day

MACHINE INCLUDES- Includes a 13' cutting torch, 8' ground clamp, 20A-15A adapter, 1 additional electrode and 1 additional nozzle. Backed by a 12-month warranty

PRODUCT SPECIFICATIONS- Dimensions: 15.125" (384.18 millimeters) x 8.125" (206.38 millimeters) x 12" (304.8 millimeters) Weight: 21.5 lbs. (9.75 kilograms) Air compressor capable of 1.5 CFM is required (not included)

Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!

【Plasma Cutting&IGBT Inverter】Plasma Cutter allows you to cut metals without touching. This Plasma Cutter with Inverter&IGBT Technology, offers better cutting quality and longer service life.

【Portable Plasma Cutter】20-40 Amp DC 110V/220V Dual Voltage Plasma Cutter with Plasma Cutting torch,Ground clamp,Gas tube & Ceramic Ring and Converter Power Cord. Easy to set up, operate and carry.

【Multi-Application Cutter】Ideal cutting thickness 6 mm, 10 mm maximum.Suitable for cutting through Rough, Painted and Rusty Surfaces, an effective way of cutting thin and thick materials alike. Typical materials cut with a Plasma Cutting Torch, including Steel, Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc.

【Safety Guarantee】Plasma cutter comes with overheating protection indicator and screen current display. Energy saving, power saving, smooth cutting, Noiseless, and easy to operate.

【Quality Guarantee】If you are not satisfied with this Plasma Cutter, unconditional refund within 45 days of the purchase date. If you have any questions, please feel free to contact us.

Non touch pilot arc plasma cutter: efficiently cuts though rough, painted, and rusty surfaces and produces minimal slag. Pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.

Output and performance: 10-50 A DC output, 1/2” ideal clean cut and 3/4” maximum severance cut under 220/240V. 10-35A DC output, 1/3" ideal clean cut and 2/5" maximum severance cut under 110/120V. SUITABLE CUTTING for Stainless Steel, Alloy Steel, Mild Steel, Copper, Aluminum, etc. Uses non-hazardous compressed air to cut, safe and at low cost.

The compactible consumables set, for this Brown Color LTPDC2000D Plasma Cutter are "PCS22" or "PCS33". Please search "Lotos PCS22" or "Lotos PCS33". It CANNOT compatible with Lotos PCON40 or PCON90 Consumables Sets or any other third part consumables set

Buy with confidence: we offer 30 days refund :us based customer care & support team: please feel free to contact us by phone or email, we always stand back on our products. please submit the registration form on our website

50 Amp Digital Inverter Air Plasma Cutter

Automatic Dual Voltage / Dual Frequency (110/220V 50/60Hz)

PAPST Advanced German Cooling System

Max Severance Thickness: 3/4"

Max Cut Thickness: 1/2"

Cutting Thickness: 3/10" ideal cutting thickness and 3/5" maximum cutting thickness under 220V @65PSI. 110/220V output, high frequency 50/60Hz.

Widely used for cutting stainless steel alloy steel,mild steel,aluminum,copper and other color metal materials.This SV50D plasma cutter can be widely used at demanding industrial ,construction work, and home hobby use.

Internal air hose,set the regulator with pressure adjustment allows you to quick connect to your air compressor(1.4CFM), it is visible and easy pressure adjustment. The whole machine can be setup very quickly(with 3 seconds blowing back time to cool down the torch).

Dual voltage capability allows the machine to run directly on 220V 50/60 Hz power, 110V 50/60 Hz. Voltage adapters included in the package.

We provide 2 years warranty for this SV50 plasma cutting equipment(except consumables),please feel free to add to cart and email us with any assistance any time.