19 Best Rated Filament Dryer 2023

①【Keep dry, good printing effect】Dust-free, moisture-free. 3D printer filaments are hygroscopic, moisture can cause printing failure, SUNLU filament dryer box help to dry excess moisture, keep the filament dry, no more brittle PLA, PETG, ABS filament.

②【Fully assembled and easy to use】SUNLU dry box is simple to operate, turn on by hit either button, hold the left button to change the dry time, press the right button to change the temperature setting. SUNLU dryer box can be used as a spool holder. The bearings that hold the filaments are very stable and allow the filament to roll steadily.

③【Simple but Effective】The print quality will be better if using filament dried by SUNLU filament dehydrator box, surface smoother, layer adhesion increased. It can be more helpful if you live in a humid temperature zone.SUNLU filament dryer box is easy to open and the lid is transparent allowing direct inspection of the length of filament remaining in the box.

④【High Compatibility】The adjustable temperature(time) range is 35-55℃(0-24hours), SUNLU dryer box can bake most types of 1KG filament at a designated temperature for hours. Maximum capacity of the drying oven: 210*85 mm, can accommodate filament diameter: 1.75mm/2.85mm/3mm.

⑤【Good After-Sales Service】After-Sales Service and Technical Support are provided. If you have any questions about SUNLU filament dehydrator box, don't hesitate to contact us.

①【Rescue Poor Printing】Newest SUNLU FDM 3D Filament Dryer S2 is more efficient to solve stringing, clogging, poor adhesion, poor printing quality and layer shift of 3d printing filament caused by ambient humidity.

②【360°Embracing Heating】The 3D filament dry box S2 has added upper and lower heating plates to achieve all-round surrounding heating and rapid drying, breaking through the heating temperature to 35℃~70℃.

③【Large-size Touch Screen】New 3.42*2.87inch touch screen, tablet-like operation experience. One-key switching between ℃ and ℉. According to various filament, user-friendly one-key recommended temperature setting.

④【Real-time Humidity Detection】Built-in high-precision humidity detection sensor, displaying real-time humidity inside the filament dryer. Assist to judge the drying effect.Automatic sleep standby after drying.

⑤【High Filament Compatibility】Compatible with all the mainstream 3D filament brands and all standard filament diameters 1.75mm/2.85mm/3.00mm; Works perfectly with PLA、PLA+、PETG、TPU、ABS etc，Including high-end filament PA、PC.

Filament Dryer and Remove Moisture: Comgrow Dry Box is designed to keep filament dry and remove moisture from kinds of filaments. Internal heating during printing provides a dry storage environment for 3D printer filaments, keeps the filament dry. Avoid entanglement, clogging, poor adhesion and layer migration caused by the dampness of the printing wire.(Note: Only used for the drying of 3D printer Filament)

Real-time monitoring of temperature and humidity: Adjustable temperature range 40°~ 50 °C, setting time from 6 hours to 12 hours.2-inch LCD screen and touch buttons make it easy to operate, it is more comprehensive and clear of the information display.Press the power button to start, hold the function button(M) to change the dry time and the temperature setting.

Large storage volume: Comgrow dryer box can store 2 rolls of filaments with a width of less than 70mm at the same time or 1 roll of filaments with a width of less than 150mm.Works perfectly with all standard filament diameters 1.75mm/2.85mm.

Great sealed filament box: The outlet structure adopts a silicone cable sheath and Teflon tube, the outlet is smooth and can be covered with a plug when not in use.The upper cover has a snap button structure, and the sealing performance is good.

After-Sales Service: If you have any unsolvable problems about COMGROW filament dryer box, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.

【Make Filament Live Again】: Filament dryer box drys the wet or brittle 3d printer filament and even make it better than the new one. No plastic strings and clogging.

【Filament Storage Box】：Dryer box can be used as storage box or filament holder. Sealed protection, comprehensive dust-proof and damp and no impurities. Keep filament always stand by.

【Quick-Heating & Drying-Printing】: Filament dehydrator can reach 55℃ by heating in a few minutes so as to start printing right now. No need to dry in advance, turn on the power of 3D printer and dryer box to enjoy printing.

【99% Compatible with Multiple Coil】: Filament dryer box works for different filament types and diameters. Compatible for diameter 3.00mm/2.85mm/1.75mm PLA filament, Wood filament, PETG filament, ABS filament, Silk filament.

【Works in Quiet & After-sale】: Filament dryer box works in low decibel. We are 24/7 hours online and feel free to contact us for solutions. Please be assured that we’ll always stand behind our products.

【Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments.

【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 kinds of 3d printing filament commonly used in the market

【Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect.

【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc.; C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm.

【User-friendly Design&1 Year Guaranteed After-Sales Service】 A: The design of two rollers inside the box allows you to print while drying; B: 2 inch large screen LCD monitor, can display temperature and time clearly and brightly; C: Ultra quiet design, less than 10db while operating, no disturbing of your life and work; D: Exquisite packaging design- best gift: Come on to buy one to present to your friends who love 3D printing

【3D FILAMENT DRYER AND STORAGE】Dry Box is designed to keep filament dry and dehumidify various kind of filaments, Heating during the printing Provide a dry storage environment for 3D printer filament.

【24 HOURS KEEP FILAMENT DRY】The large-area heating block can ensure that the contact area between the filament and the filament is continuously rotated in the dry hot box to remove water. The best bearing, thereby reducing all resistance on the filament of the 3D printer

【EASY TO USE】The filament drying oven has a 2-inch LCD screen and only two buttons (set temperature and time), the default oven drying time is 6 hours, short press the left button to reduce the drying time. Temperature, short press the right button to increase the temperature.

【MAXIMUM CAPACITY】Support the maximum capacity: Φ210*85(H)mm, and the diameter of consumables line: 1.75mm/2.85mm/3.00mm.The Dry Box is compatible with 99% of 3D printing filaments and 3d printer.

【AVOID INTERRUPTION】 Drying box has a quiet sound even when running, and can be used with various FDM printers. We provide a 6-month warranty for the whole machine, if you have any questions about the operation of the product, please feel free to contact us.

【Say goodbye to the printing failure】3D printing filaments are hygroscopic, moisture can cause printing failure. SUNLU filament dryer box helps to dry excess moisture, improve your 3D model, and make the filaments say goodbye to the troubles of drawing, clogging, and poor adhesion.

【No assembly required, easy to operate and effective】SUNLU 3D printer Filament enclosure requires no assembly and can be used right out of the box. There are only two buttons, and the operation is convenient and simple. SUNLU filament dehydrator box makes the printing effect better and the surface of the model is smoother. No more brittle PLA+, PETG, ABS filament.

【Personalized settings, strong compatibility】The default drying time of SUNLU dryer box is 6 hours, you can also set the drying time and temperature according to your own preferences. The time setting range is 0~24 hours, and the temperature range is 35°C~55°C. The drying box is compatible with filaments of different brands such as: SUNLU, ERYONE, ESUN, GEEETECH, etc. It is also perfectly suitable for all standard filament diameters: 1.75mm/2.85mm/3.00mm.

【Ultra-quiet design, free your hands】SUNLU filament Enclosure box is very quiet at work, less than 10db when running, no disturbing of your life and work. The design of two rollers in the box allows you to print while drying, improving printing efficiency and freeing your hands.

【Perfect after-sales service and quick reply to emails】Provide after-sales service and professional technical support, and also include a one-year warranty period. Reply to emails quickly during working hours, if you have any questions about SUNLU Filament Dehydrator Box, please feel free to contact us.

【Keep Dry】Dust-free, moisture-free. 3D printer filaments are hygroscopic, moisture can cause printing failure, SUNLU filament dryer box help to dry excess moisture, keep the filament dry, no more brittle PLA, PETG, ABS filament.

【Fully assembled and easy to use】SUNLU dry box is simple to operate, turn on by hit either button, hold the left button to change the dry time, press the right button to change the temperature setting.

【Simple but Effective】The print quality will be better if using filament dried by SUNLU filament dehydrator box, surface smoother, layer adhesion increased. It can be more helpful if you live in a humid temperature zone.

【High Compatibility】The adjustable temperature(time) range is 35-55℃(0-24hours), SUNLU dryer box can bake most types of 1KG filament at a designated temperature for hours.

【Good After-Sales Service】After-Sales Service and Technical Support are provided. If you have any questions about SUNLU filament dehydrator box, don't hesitate to contact us.

【DRYER & STORAGE BOX】The dryer box is specifically made for the purpose of drying 3D printer filament, intended to remove the moisture from a spool of filament caused by ambient exposing. Filament can be used while in the box, the dryer function as both storage box and filament holder. Sealed protection, comprehensive dust-proof and damp, no impurities.

【ADJUSTABLE TEMPERATURE & HUMIDITY MONITOR】Adjustable heating temperature to accommodate needs of various filaments, actual and setting temp are displayed on the LCD indicator. (NOTE: A76/LR44 button battery ALREADY included) The default time is 6hrs, while you can also reset from 0-24hrs up to 70℃ or even infinite heating time regarding your needs. Equipped with individual humidity sensor, measurement range from 10%-99%, real-time data will be indicated by the LCD monitor.

【COMPATIBLE WITH MULTIPLE SPOOLS】It works for different filament types and diameters, compatible with 1.75mm, 2.85mm, 3.00mm 3D filament such as Nylon, PLA, PETG, TPU, Wood, ABS, etc. Extra large space allows usage 4 rolls of 0.5kg filaments, 2 rolls of 1kg filaments, 1 roll of 3kg filament at the same time, with two built-in rotating shafts that allow the filament to continuously rotate in a dry hot box to remove moisture.(Note: for Single Large Spool-217x174mm, Dual Small Spools: 217x80mm(H*W)

【100W PTC HEATER & BUILT-IN FAN】different from applying ordinary heater 48W PI heating pad to heat up space, our product use 100W PTC heater which is more durable, energy-saver, and environmentally friendly, makes filament drying more evenly. Also a Built-in fan is designed to circulate the hot air inside the filament dryer box to make drying system better remove the moisture.

【BEST GIFT& 1 YEAR GUARANTEED AFTER-SALES SERVICE】Exquisite packaging design- best gift: Come on to buy one to present to your friends who love 3D printing; we provide 1 year free after-sale service, if you have any problems with the filament dryer, we will solve for you.

【3 Hours to Dry for that Perfect Print】Dry in the JAYO S1 dryer box only 3-6 hours will get better print effect, remove moisture from filament, make your ruined filament live again.

【Extremely Silent Running】When the machine is working, the sound <10 dB, which will not affect sleep and work.

【Compatible with 99% of 3D Filament Spools】Maximum capacity of JAYO dryer box is ¦µ210*85(H)mm. Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm.

【Easy 4 Steps to Use】Turn on the power, load your filament, and then set the temperature and drying time you want, recommend baked 3-6 hours before printing, JAYO dryer will have better printing effect when used with printer.

【What You Get】Gift box*1, dryer box*1, power adapter*1, fixed shaft*1, manual*1, 12 months warranty, and friendly after-sales service.