The 10 Best Cnc Router Under $500 in 2023

What you get: 1 PCS Genmitsu CNC Router Machine 3018-PROVer Kit; 1PCS 455nm Blue-Violet Light Fixed Focus Laser Module Kit

The 3018-PROVer is the latest version of the 3018 Desktop CNC DIY Kit Series. Now Pre-assembled and no fuss with assembly taking less than 30 minutes out of the box. Class leading value got even easier to use.

Still based on open-source Grbl v1.1 the PROVer has stepped up to more powerful but silent Toshiba TB6S109 drivers with added life and performance along with added Optocouplers to protect your mainboard from hard stops without risk of damage and eliminate signal noise for more consistent projects and longevity.

Laser Kit: The fixed focus distance is 20mm. Compared with the adjustable focus laser module, the light spot of the fixed focus laser module is smaller. At the same power, the fixed focus laser module can cut 3mm linden wood in one pass, not possible with current adjustable laser modules.

Longer Service Life: The fixed focus laser module can work at full power for 8 hours without any light decay. The service life can be up to 10,000 hours.

Level up your CNC: This kit will extend all of your XY-Axis, easily convert your PROVerXL 4030 to a 6060 (24”x 24”) with pre-installed axis carriages. Evolve with your CNC, upgrade as you go, start big and get to making MORE.

Compatibility: Drop-in replacement for use with a Genmitsu PROVerXL 4030. The 6060 Aluminum Board & MDF Board will also be available soon.

Flexible Extension: You could extend to 6060, 6040, or 6030 with this kit, just built to suit your needs.

Simple Assembly: We will take you through the assembly process every step of the way. You could find the Installation Guide located in our at the resource center.

Cost-Effective: Save money by putting your current CNC to better use. You don’t need to spend more on complicated assembly.

♞【Upgraded 3018 Pro CNC】 Integrated Driver Chip + Fixed Heat Sink + External Fan + Sturdy Casing to extend the life of the control board. Self-contained short circuit protection, not easy to damage. Manual download : https://bit.ly/2ZievBS

♞【Easy to Install】 This 3018Pro CNC router kit comes with paper instruction, just follow the 8 steps to install. When installing the coupling, make sure that the blue coupling is tightened.

♞【5500 mW Module】Can carve the kraft paper, wood, leather(wallet), bamboo, rubber. Repeat the engraving in the same position, you can cut through kraft paper and thin woodboard. ▲It can’t engrave Unpainted metal.

♞【Usage of 775 Spindle】Can engrave on wood, plastic, acrylic and PCB engraving/cutting. However, it can't carve hard metals, jade and other hard things.

♞【How to Use】3018Pro engraver can be controlled by GRBL software and offline manual control. If you are not familiar with CNC, please let us know and we will assist you to become familiar with this 3018pro machine as soon as possible.

【PACKAGE INCLUDE】-1pcs 110V 1.5KW Water Cooled Spindle Motor +1pcs 110V 1.5KW VFD inverter+ 1pcs Φ65mm Clamp Mount +13pcs ER11 Collet(1mm-7mm) +1pcs Water Pump+ 10 meter Water hose +10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8" Shank+ aviation wire+power wire+2pcs wrenches

【ADVANTAGE 】-Very quiet; use ordinary water as a coolant ;Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor; Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process; Runout off less than 0.005mm that 10 times precision beyond normal other spindle motor.

【EASY AND FAST TO INSTALL 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete accessories including pre-soldered aviation wire with connector and power wire, It will take just 5 minutes to install all and make all functions running.

【APPLICATION】-Wood/ Copper/Brass/Aluminum/PVC/Plastic/carving/engraving machine, advertisement engraving machine,CNC router machine, small sized processing center, high speed centrifuge etc.

【WARRANTY ASSURANCE】-We have 20 years manufacturing experience in this field, any question or problem , pls contact us ,we will get you satisfied and get all problems resolved.

Class leading values got even easier to use. Pre-assembled and no fuss with assembly taking less than 30 minutes out of the box. An entry-level CNC for anyone who wants to learn a new skill, work on an artwork project, design a DIY gift, or start a small business.

Still based on open-source Grbl v1.1 the PROVer has stepped up to more powerful but silent Toshiba TB6S109 drivers with added life and performance along with added Optocouplers to protect your mainboard from hard stops without risk of damage and eliminate signal noise for more consistent projects and longevity.

Make more with the all-aluminum body and take advantage of the added stability for milling a wider range of materials while also making clean up even easier with acrylic safety baffles to help contain dust and provide a safety barrier.

Take control of your 3018-PROVer Desktop CNC machine with controls at your fingertips. The 1.8” display will clearly display readouts and provide manual control of your mill without any computer. If a project gets out of hand the PROVer has an emergency stop control that is very visible and easy to access for immediate shutdown of your machine.

CAD/CAM software to design then convert your ideas into instructions (GCode) that the router can understand and execute (common options are Carveco, Fusion360 and Easel). If you get stuck, check out the SainSmart Resource Center (see at User Guide) or contact us with any questions that arise.

⭐️Easy to use: 3018pro's upgraded version, simple and sturdy construction allows you to assemble it in less than 30 minutes out of the box. Entry-level CNC engraving machine that can provide a good experience for novice as well as wood carving machine enthusiasts.

⭐️Powerful power: The 3018plus body is all made of aluminum alloy, which is stronger and more stable. The spindle adopts 500W motor, different from 775 motor, which can engrave and cut more materials.

⭐️open-source Grbl v1.1,which is suitable for all engraving machine control software based on the same version of GRBL. Support Windows XP, win7, win8, win10, we provide software instructions in the u disk. The package contains assembly instructions.

⭐️Design: Unlike the conventional 3018/3018pro, the Z-axis has a working stroke of 60mm and more room for creation. 52mm diameter Z-axis, leaving a square slot of 40*40mm, is compatible with the laser engraving module. The machine is equipped with 6 limit switches and an emergency stop switch to provide safety for your creations.

⭐️User Experience: In order to bring you a better CNC experience, 24-hour customer service is available online to answer your questions and solve your problems.

⚒ 〖Double Safety Design〗New version - The protective design of a 5mm translucent brown acrylic baffle on both sides enables you to watch the engraving procedures safely.

⚒ 〖Offline Controller Included〗1. DO NOT need to connect the computer; 2. DO NOT need to download files, the engraving file can be directly accessed. Manually adjust X, Y, Z axis locations as engraving start point, manually open or close spindle, manually open or close cooling fan. Note: Please don't use the computer and the Offline Controller at the same time, otherwise it will interference the communication.

⚒〖5500 mW Laser Module〗High engraving power with remarkable working time. Can read files directly in JPG, BMP, SVG and engrave images easily. Comes with a pair of safety goggles to protect your eyes. Aircraft aluminum heatsink with cooling fan ensures long working time continuously. Suitable for engraving wood, plastic, acrylic, PCB CCL, soft metal like copper and aluminum and other similar materials, but can not engrave hard materials such as hard metal and jade.

⚒ 〖Complete Kit〗3018 PRO-M is a build-it-yourself CNC router that allows you to create 3D objects from wood, plastic, acrylic, and soft surface of the aluminum. It includes everything you need to start your CNC project (1 year warranty covered). If you need instruction and software or have any questions about our product, please do not hesitate to contact us. We strive to offer the 100% satisfaction for all our customers.

Built for Power Users: Compatible with Mach3, DrufelCNC, the 3018-PROVer Mach3 CNC machine is perfect for users who are looking to build CNC skills or have had previous experience with Mach software. Capable of Canned cycles for pre-programmed actions and other advanced features not available through open source GRBL.

Pre-assembled: It is mostly pre-assembled and no fuss with basic setup taking less than 30 minutes out of the box. Upgraded with the All-Aluminum body and take advantage of the added stability for milling a wider range of materials while also making clean up even easier with acrylic safety baffles to help contain dust and provide a safety barrier.

Controller Board: It's suitable for Mach3 and DrufelCNC and supports the Windows system. The spindle motor interface can be connected to DC motors which can up to 100W, and also suitable for 775 spindle motors. (Please note that "3018-PROver" and "3018-PROver Mach3" are not the same model. "3018-PROver Mach3" has a similar appearance to "3018-PROver", but it works with the Mach3 system.)

Auto Tool Zero: With one mouse click, 3018-PROVer Mach3 will automatically return to a predefined position, allowing you to easily change and calibrate your tools.

Versatile: Capable of cutting all types of plastics, woods, soft aluminum, acrylics, PVCs, and PCBs, 3018-PROVer Mach3 can be used on a wide range of projects and materials. The open design with an effective engraving area of 260 x 155 x 35mm (10.2 x 6.1 x 1.4'') allows you to work on even larger pieces with fewer limits.

✅ Upgraded Control Board - The new control board adds integrated driver chip, fixed heat sink and external fan, as well as a sturdy shell, which greatly extends the service life of the control board. Ensure it can long working time continuously.

✅New Offline Controller - Upgrade to 1G Storage Capacity! ❶No need to connect the computer. ❷Included SD card reader to write into the root directory G-code files or NC file. ❸Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle and the power head.

✅Easy to Install - We have improved the installation mode of the lower plate, easy to install , stable structure ,take only about 20 minutes to assemble. If you want to know more about the product, please contact customer service via order.

✅Main Working Parameters - ⭐️Working area: 300x180x45mm; ⭐️Software: 3018 GRBL Control; ⭐️Spindle: 775 spindle motor (12-36V) 24V:10000r / min; ⭐️Supported System: Windows XP / Win 7 / Win 8 / Win 10.

✅Wide Application - Suitable for carve wood, bamboo, paper, leather, plastic, acrylic, PCB etc. Can not work on metal, iron, glass, 201/304 stainless steel, jewelry or silver.💗If you have any questions, please feel free to contact us, we will give you a satisfactory solution.

The new control board adds integrated driver chip, fixed heat sink and external fan, as well as a sturdy shell, which greatly extends the service life of the control board. Ensure it can long working time continuously.

Upgrade to 1G Storage Capacity! ①No need to connect the computer. ②Included SD card reader to write into the root directory G-code files or NC file. ③Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle and the light head.

⭐️Effective working area: 300x180x45mm(11.8 x 7.1 x 1.8”); ⭐️Software: Grbl control(Candle) ; ⭐️Spindle: 775 motor, 24V, 10000 RPM; ⭐️Supported System: Windows XP / Win 7 / Win 8 / Win 10.

Suitable for carve wood, bamboo, paper, leather, plastic, acrylic, PCB, CCL, metal surface paint, metal surface plating etc. Can not work on metal, iron, glass, 201/304 stainless steel, jewelry or silver.