The 6 Best 5 Axis Cnc Router in 2023

The engraving machine Model: HY-30405-2 and Input Power: 220V or 110V AC

The machine come with Mach3 software what in the CD can only work with Windows XP or 2000 system.

The Carving machine can be controlled manually or by PC. The machine has a hand-held controller and a small display screen for manual control. However, in general, manual controllers are mainly used for the purpose of adjusting axle motion in machining.

This 5-axis 3040 miniature vertical CNC engraving machine is a very powerful and useful machine. it come with 2.2kW water-cooled spindle what is driven by a stepping motor.

The CNC Router can be used as carving machine, lathe or drilling/milling machine, for wood, stone, metal and other different materials and so on .

The maximum matching 5-axis stepper motor driver

The two-stage signal processing, signal transmission smooth, powerful anti-jamming

Relay output control interface, can be accessed by the spindle motor or the air pump, water pump, etc

Five-axis job LED display, visual display products, working condition

Name:Mach3 Control Board;The MACH3 interface board is connected to the computer through the USB port and the LPT port. The length of the USB cable and the 25-bit LPT cable cannot exceed 1.5 meters.

1. A special high speed chip is used to process the input and output (I/O) signals. It is capable of making the machine work stably, with the features of correcting and enlarging the signals that removing the unnecessary disturb signals.

2. The computer LPT port supplies the power individually, separating from the power supply of other parts. Therefore, the computer and machine tool isolate effectively. It makes the data more secure, with further insurance of security and stability.

3. There are 5 input signals, communicating with the host computer, which are isolated by the optical coupling. Among the optical coupling isolation, the P11and P12 are high-speed, which can be used for connecting main shaft encoder, or the same demanding signal as hand wheel A, B.

4. There are 12 output signal, which is allowed to controlling output, supporting as many as 6 axis linkage. Some of the output port is reusable functinality. Meanwhile, one port only can be used as one function.5.This board only support LPT port,if your laptop does not have its own parallel port,you need purchase a PCI LPT converte Card.

Fully support MACH3 and other computer software that supports parallel port control.

USB power supply and peripheral power supply are separated to ensure computer security.All input signals are isolated by optical diaphragm, which can be connected to emergency stop, tool setting, limit, etc. to ensure computer security.

The peripheral wide voltage input, 12-24V, and anti-reverse function.

Can be connected to the common or common yang, the input level is 5V driver.

The board prints all port names at a glance.

♞【Product】4 Axis nema23 stepper motor driver controller kit; Model Number:23HS2430B/CW5045/V5

♞【Stepper Motor】Nema23 57 type;Step Angle: 1.8°; Current: 3.0A; Holding torque: 425oz-in/ 280Ncm; Shaft : Dual Shaft,8mm diameter; Wirings: "A+"=Red / "A-"=Green / "B+"=Yellow / "B-"=Blue

♞【Driver】CW5045 driver Voltage: DC 24-50V; Current: rated maximum output reaches: ±4.5A ; Driver microstep:256microstep; Mircostepping 1(1.8°), 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256, 1/5, 1/10, 1/25, 1/50, 1/125, 1/250

♞【5 Axis Breakout Board】Working voltage is 5VDC and support with MACH3,EMC2,KCAM4 software

♞【400W 36V 11A DC Switching power supply 】Please flip the side input voltage selector switch,Input: AC110V-120V or AC220V-240V

Name:Mach3 Control Board;The MACH3 interface board is connected to the computer through the USB port and the LPT port. The length of the USB cable and the 25-bit LPT cable cannot exceed 1.5 meters.

1. A special high speed chip is used to process the input and output (I/O) signals. It is capable of making the machine work stably, with the features of correcting and enlarging the signals that removing the unnecessary disturb signals.

2. The computer LPT port supplies the power individually, separating from the power supply of other parts. Therefore, the computer and machine tool isolate effectively. It makes the data more secure, with further insurance of security and stability.

3. There are 5 input signals, communicating with the host computer, which are isolated by the optical coupling. Among the optical coupling isolation, the P11and P12 are high-speed, which can be used for connecting main shaft encoder, or the same demanding signal as hand wheel A, B.

4. There are 12 output signal, which is allowed to controlling output, supporting as many as 6 axis linkage. Some of the output port is reusable functinality. Meanwhile, one port only can be used as one function.5.This board only support LPT port,if your laptop does not have its own parallel port,you need purchase a PCI LPT converte Card.