Best 300x300x400 3d Printers Of 2023

EXTRA LARGE: Printer CR10 V3 comes with one of the largest build spaces available. At 12inx12inx15.5in, you can print models that 90% of other printers could not. The unique Bowden extruder design reduces the weight on the X-axis which delivers better performance even on very tall prints.

OPEN SOURCE: In the spirit of innovation and progress, we have decided to make our firmware and design plans available to all for extensive modding and improvements. We hope to create a large community of users who contribute to the project ultimately resulting in a better product for all.

HIGH QUALITY: All aluminum frame provides a sturdy base meant to last for years. The POM engineering thermo-plastic "Triangle-Slot" wheels provide excellent dimensional stability even during extended use. Elimination of metal-on-metal steel rods cuts noise down dramatically.

GLASS BED: The reliable and flat glass bed can make the model easier to adhere to when printing, and easy to remove after cooling. Forget about other printers with uneven printing surfaces and warped beds. This glass bed ensures a 100% usable and flat surface for any print from the smallest test file to the largest model. An absolute necessity when dealing with such a large build space, print from corner to corner and get perfect layer lines every time.

WARRANTY: Our experienced 3D printing engineers are available 24/7 to offer you lifetime technical support as well as our 1-Year limited manufacturers replacement part. If you are not satisfied with the results of your prints, contact us and we will work with you to provide assistance until you are printing like a pro!

TITAN DIRECT DRIVE: The direct extruder is right above the hot end with little space in between, which enables the extruder to push the filament directly into the nozzle. Since it minimizes the distance for filament traveling to the hot end, the direct extruder is more helpful and reliable when producing 3D prints with flexible soft filaments like TPU and ABS and can help to avoid filament stringing and oozing during printing.

DUAL PART COOLING FANS EXTRUDER: Two part cooling fans are installed on the two sides of the hotend. This can promote to dissipate heat and cool down immediately, thus reducing jamming and poor-spillage.

UPGRADED SILENT MOTHERBOARD: CR-10 V3 has adopted industrial self-developed motherboard backed by TMC2208 ultra silent driver. It demonstrates firm properties as well as reduces noise. 1.1.6 Version firmware, theminal runaway protection and resume printing function are pre-installed in the motherboard.

ALL METAL FRAME AND TRIANGLE STABLE STRUCTURE: It adopts all metal frame and the high quality V-profile structure , forms a firm golden triangle that effectively reduces errors caused by vibrations and makes CR-10 V3 more Likely to print out with high accuracy prints.

24V/350W MEANWELL POWER SUPPLY: Equipped with solid 24V/350W Meanwell power supply pairs with thermally efficient bed heater. It allows for rapid heating to 100; BL-Touch Frame Reserved.

Dual Blower Kit: The LGT LONGER Upgraded LK5 PRO 3D Printer use the newly upgraded cooling fans - dual blower kit which can promote quick cooling on the extruded filament, improves the quality of printing, have strong power on cooling nozzle to get a better and smooth surface of model .

Large Print Size: The LGT LONGER Upgraded LK5 Pro 3D Printer comes with larger build spaces available, the MAX build volume reaches 11.8x11.8x15.7 inch, which able to print models that 90% of other 3d printers could not.

Resume Printing Function: The LGT LONGER Upgraded LK5 Pro 3D Printers can resume printing from the last recorded extruder position after suffering unexpected power outages or any other unexpected stoppage. also the sensor pauses prints and sets off an alarm when run out of filament which saving your time and reducing waste.

Lattice Glass Platform: The LGT LONGER Upgraded LK5 Pro 3D Printer use the newly upgraded print platform which rapid and stable heating, Strong adhesion, prints adhere better without the warping and can be used repeatedly without any loss of performance.

Fast Service and Warranty: ALL LONGER 3D Printers provide the best 24 hours after-sale service for every purchase, for 12 months. if have any problem, can contact us through email and phone.

【More Stable Printing】Creality CR-10S 3D Printer, Y-axis double screw design, more stable lifting, increase higher printing accuracy.

【V2.1 Motherboard Added】Creality 3d V2.1 motherboard: all-upgrade, quality assurance, industrial-grade process, 200 hours of continuous printing without pressure.

【Resume Printing Function】Creality CR-10S large size 3D printer , resume printing while the power-off，the the motherboard is fully upgraded and supports continuous power failure, which effectively reduces model scrapping caused by power outages.

【Filament Sensor】 Creality CR-10S 3D Printer for home use will automatically be suspended to ensure the model can be smoothly printed when the filament runs out or disconnected.

【Noise Reduced】Linear Pulley System is included with V-profile + precision pulley, running more smoothly, more wear-resistant. Effectively reduce noise while printing.

【Dual Z-Axis】 Dual lead screw Z-axis design, gives much more stability and accuracy than single lead screw models sold by the competition.

【Headache-Free Assembly】 The CR-10S Desktop 3D printer machine is shipped partially assembled in 3 parts; it is easy to complete the assembly process. It takes approximately 20 minutes to assemble.

【MK10 Technology Adopted】MK8 extruder mechanism is added to the printer, A brand-new patented the infrastructure that effectively reduces the risk of plugging and poor spillage, and can print almost all consumables on the market.

【Resume Print】 The new upgraded control board enables the capacity to resumes printing after changing Filament, power outage, or any other unexpected stoppage.

【Filament Monitor】 The CR-10S comes with a convenient monitor that will detect when the printer has run out of filament, automatically pausing the print, and will alert the user to restock the Filament before continuing. Say goodbye to wasted Filament and time.

【Phenomenally Quiet】The powerful power brought by the TMC2209 stepper motor drive also significantly reduces the noise level, so that the artillery Sidewinder X2 fdm 3d printers has a hushed operating sound even working at fast speeds, not exceeding 50 decibels when working, good for home use, making you almost forget it working.

【Intelligent power supply】Optimize the voltage range,100V-220V wide voltage switch. Combined with the upgraded AC hot bed cabel, can heat the hot bed to 230°F in 2 minutes. With built in thermal runaway protection, even if the board or the SSR malfunctioned, the bed won’t heat up endlessly, even bad things happen.

【Synchronized Dual Z System】There are 3 inductive sensor end stop separately set on XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and maintain good stability under high-speed printing. Most importantly, features Synchronized Dual Z System greatly increase its printing stability.

【Self-developed motherboard】The self-developed 32-bit motherboard greatly stabilizes the printing speed, and print quality of the large artillery sidewinder X2 3d-printer; the print speed can reach up to 150 mm/s. Dynamic leveling compensation，intellisense 5*5 auto leveling, more accurate measurement of the inclination of the hot bed plane, to achieve better printing results for beginners.

【Upgrade Cable Manager】On the basis of 95% pre-assembled of SWX1, the use of injection jigs reinforces the previously connected parts of the robin cable and the machine, making it less susceptible to damage, connection stable performance of SWX1 robbin cable is improved and easier to maintain, and easier to install.

Titan Direct Drive: The direct extruder is right above the hot end with little space in between, which enables the extruder to push the filament directly into the nozzle. Since it minimizes the distance for filament traveling to the hot end, the direct extruder is more helpful and reliable when producing 3D prints with flexible soft filaments like TPU and ABS and can help to avoid filament stringing and oozing during printing.

Dual Part Cooling Fans Extruder: Two part cooling fans are installed on the two sides of the hotend. This can promote to dissipate heat and cool down immediately, thus reducing jamming and poor-spillage.

Upgraded Silent Motherboard: CR-10 V3 has adopted industrial self-developed motherboard backed by TMC2208 ultra silent driver. It demonstrates firm properties as well as reduces noise. 1.1.6 Version firmware, theminal runaway protection and resume printing function are pre-installed in the motherboard.

All Metal Frame and Triangle Stable Structure : It adopts all metal frame and the high quality V-profile structure , forms a firm golden triangle that effectively reduces errors caused by vibrations and makes CR-10 V3 more Likely to print out with high accuracy prints.

24V/350W Meanwell Power Supply: Equipped with solid 24V/350W Meanwell power supply pairs with thermally efficient bed heater. It allows for rapid heating to 100; BL-Touch Frame Reserved.

✔️【Large print size】The maximum print size of this FDM printer is 300x300x400mm, bringing you the maximum possibilities for all different size models.

✔️【Quick assembly】6 screws can complete the printer frame installation, easy and fast assembly.

✔️【Easy Wiring】Use CAT7 network cable to transfer data, plug in two network cables to complete the wiring.

✔️【Control box skylight design】Convenient to view the operating status of the motherboard, easy to replace the stepper driver.

✔️【Technical Support】If you have any questions before purchase or any questions about the operation after purchase, please contact us.

Upgraded Silent Motherboard: CR-10S Pro V2 adopts V2.4.1 independently developed silent motherboard which was produced with high-tech chips, which demonstrates firm properties as well as reduces noise.

Double Ways for Leveling: The CR-10 Pro V2 3D Printer is equipped with BL Touch Auto Leveling Kit and Large Knobs for both auto leveling and manual leveling of the printer. The CR-10 Pro V2 can automatically measure the height of 9 unique points on the heated bed to determine the better settings for perfect prints every time.

500W Meanwell Power Supply: The CR-10S Pro V2 3d printer comes with a UL Certified Meanwell power supply. 500W large power and wide voltage power supply. 100V-240V can be used, and no need to adjust. It's convenient and fast, ensuring long-term stable printing.

Resume printing function: This printer supports the resume of printing if there is a power-off or you stop printing.

Official Creality 3D Amazon Supply: All of our printers are delivered from official creality 3D Amazon shop with considerate After-Sales Services including original part replacement and technology consult, ensuring remarkable user experience!

💗EASILY QUCIK ASSEMBLY-Only 3 steps to set up Creasee SKYWALKER30 3D printer with 13 screws,so there is no need to endure a complicated installation process. Start your 3D journey easily in less than 30 minutes.not only meets fast assembly needs for expert users but also friendly use to beginners.

💗RESUME PRINT FUNCTION-Our upgraded control board offers state of the art, "Resume Print" technology,CREASEE SKYWALKER30 has the ability to resume printing even after a power outage or lapse occurs,saving your time and reducing waste.

💗LARGE PRINT SIZE-Compared with other brands on the market,the printer of the same size,our CREASEE SKYWALKER30 have Large printing volume of 11.8"(L) x 11.8"(W) x 15.7"(H) / 300x 300 x 400mm,which is capable of making much bigger prints and allows you to expand your creative possibilities. If you want a bigger size, the CREASEE SKYWALKER30 is your choice.

💗3.5INCH FULL COLOR TOUCH SCREEN-The new display equipped with UI LCD screen,you can say goodbye to the era of manual knobs and dot-matrix display. Optimized UI interface, easy operation,At the same time, we add a rotary button operation beside the screen greatly improve user experience, This is a unique design.

💗CARBORUNDUM GLASS PLATFORM-Enable the hotbed heat up quicker and prints adhere better. The Model Can be Easier Removed but Not Damage the Models,With the latest Creasee SKYWALKER30 3d printer, you no longer have to buy this upgrade because the printer comes with it as standard.

💗SAFE AND STABLE POWER SUPPLY-Creasee SKYWALKER30 with a UL Certified power supply,that can heat the hot bed to 110℃ in just 5 minutes.This power supply will protect your 3d printer from unexpected voltage spikes and power outages which has Short Circuit Protection / Over Load Protection / Over Voltage Protection.

💗WARRANTY AND SERVICE-All CREASEE 3d printers are provided lifetime technical assistance and 12-months warranty,more than 20 engineers provide professional customer service.Please kindly contact us(seller) via “ask a question” find us Or send us an email, cause our customer service will respond to you within 24 hours no matter what question.

💗SILENT TO PRINT-Self-developed Silent Motherboard which has stronger anti-interference, faster and more stable motion performance, reduce noise and wobbling during printing, smoother motion and quieter printing process;CREASEE SKYWALKER30 provide a quiet printing experience for 3D printing enthusiast.

💗UPGRADED EXTRUDER DESIGN-CREASEE extruder provides precise extrusion for your 3D printing with solid filament drive and overall mechanical design compatible with most filaments, Integrated extruder, no easy clogging of nozzles, easy filament change,

The print speed can reach up to 150 mm/s, and with the Direct Drive Extruder, makes high quality print, especially for flexible filament. When it arrives on your doorstep, the Sidewinder X2 comes 95% pre-assembled, which makes installation easy as can be.

The printer has a direct drive extruder and a fast heating AC heat bed with built in thermal runaway protection, even if the board or the SSR malfunctioned, the bed won’t heat up endlessly until bad things happen. With the Lattice glass smooth headbed surface, it makes all types of filaments can be easily stick on.

There are 3 inductive sensor end stop separately set on XYZ axis while those non-touch, high-precision limit switches can automatically calibrate and maintain good stability under high-speed printing. Most importantly, features Synchronized Dual Z System greatly increase its printing stability.

SW-X2 will save you from the loss of power. When it recover from a power failure, the machine will continue to print. Also, it will automatically pauses your 3D print and notifies you when you've run out of filament, saving you time and money.

With a 300 x 300 x 400 mm build volume, the Sidewinder X2 3D printer has a hushed operating sound even working at fast speeds, thanks to its exclusive ultra-quiet stepper drivers which significantly reduce the noise level. SW-X2 overhauled the motion system on the Z, replacing the leadscrews with a belt-driven system, which not only reduces the noise level but also allows for faster print speeds.

Upgraded hotbed: larger printing size 300*300*350mm. Aluminum substrate heatbed comes with a glass panel, so that the printing is smooth without sharp edge and the model is easy to remove.

Upgraded mainboard: Added designs of over-current protection and short-circuit protection, with smaller current configuration, and it is safe and reliable.

Upgraded frame: All-metal frame body, stable structure and high printing precision.

Upgraded operation method: Moveable operation LCD display, the magnetic movable panel breaks through the ergonomic design. Efficient and convenient to operate knob type button.

Self-assembly Version, All parts are unassembled, should be installed by yourself. The DIY version allows comprehensive study of 3D printer's assembly and construction.