The 10 Best 1 Inch Scope Rings For Picatinny Rail in 2023

These Vortex Hunter Rings position the center of the riflescope tube at a height of 0.87 inches (22.0 mm) from the base.

Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.

Made from aircraft-grade 6061-T6 aluminum for optimum strength.

Sold two rings per package.

Base Clamp Screws:25-30 in/lbs

Double scope ring mount for Picatinny/ Weaver Rail (21mm).

Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.

Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.

The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch)

With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily.

1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount

Monstrum Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld

1 inch diameter rings for mounting standard 1 inch rifle scope tubes

Available with either Picatinny or Weaver standard base

Available in four heights to match your needs: 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch

Perfect for All 21mm Picatinny/ Weaver Rails: This set includes 2 pieces medium profile and 2 pieces high profile. Suitable for all 1 inch / 25.4mm scope tube.

Built-in Tape Protection: Not only can it prevent the scope from being scratched, but also the scope moving forward due to the recoil force of multiple shots.

Lightweight and Durable: Aluminum alloy with black anodized surface, sturdy and lightweight. The hollowed out is designed to be extremely lightweight and provide potential vision.

Rail Clamp Screw Design: With 1 rail clamp screw and 2 scope clamp screws perside, ensure mount all 1 inch scope firmly. Comes with 2 pieces allen wrench.

Size Detail: Medium Profile Dimension: 1.9 x 1.6 x 0.8 inch, Weight: 2 ounce; High Profile Dimension: 2.0 x 1.6 x 0.8 Inch, Weight: 2 ounce.

✌【Perfect for All 21mm Picatinny Rails】LONSEL 4 set of different heights 1'' scope mount rings include 2 pcs medium profile + 2 pcs high profile in one package. These scope rings fit for all 21mm standard picatinny rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube. Available in two styles, A must have scope rings for hunting shooting!

✌【4 Set Of Two Styles 1'' Scope Rings】2 Pcs Medium Profile: 0.5'' gap from base of mount to bottom of ring, Item Height 1.9'', Dimension 1.9 x 1.6 x 0.8 Inch, Weight 2 Oz per ring; 2 Pcs High Profile: 0.71'' gap from base of mount to bottom of ring, Item Height 2.0'', Dimension 2.0 x 1.6 x 0.8 Inch, Weight 2 Oz per ring.

✌【Hollowed-Out Design & Built-In Tape Protection】Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.

✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe performance in the field.

✌【Rail Clamp Screw Design & Easy To Install】With 1 rail clamp screw and 2 scope clamp screws per side, ensure mount any 1'' scope firmly, just twist on/off the rail clamp screw nut via allen wrench and mount the base on 21mm rail, simple and quick to remove or install. Comes with 2 pcs allen wrench.

☑ Double scope ring mount for Picatinny/ Weaver Rail (21mm).

☑ Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope.

☑ Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.

☑ The ring is for most scopes which are in 1''/ 25.4mm scope tube. Medium profile, 0.5'' gap from base of mount to bottom of ring. ( Item height: 1.9'')

☑ With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily.

High profile scope rings for the Picatinny mounting platform with a see-through channel to allow for concurrent usage of the front iron sights

Available in 1 inch and in 30 mm diameter versions. Please check the tube diameter of your scope before purchasing.

Mount base mechanism comes equipped with custom Picatinny locking bolts that slot seamlessly into your Picatnny rail with zero wiggle - guaranteed to hold zero against the toughest of recoil.

Uses hardened steel Torx mounting hardware to prevent stripping of the bolts

All Monstrum mount and accessory products come with a lifetime guarantee

1 inch diameter scope rings for mounting standard 1 inch diameter tube rifle scopes

Mounts to any flat top Picatinny or Weaver rail equipped rifle

High profile in height, 0.395 inches from base of mount to bottom of rings

Light weight 6061 aerospace aluminum construction

All Monstrum Tactical mount and accessory products come with a lifetime guarantee

Scope Rings Type: Medium Profile (21mm),scope rings are for standard scopes 25mm scope tube.

With two rail clamp screws and six scope clamp screws, Precision and Repeatable Alignment.

Precision machined from high quality aluminum alloy with anodized black matte finish.

Come with a plastic gasket on the inside of the rings to keep protecting your scope and holding secure.

Design in hollowed-out configuration between the ring and the bottom of the base to release heavy duty when clamping the scope.

The double tactical low profile scope mount fit for 1 inch / 25.4mm scope tube on the picatinny/weaver rails.

The height from the center of the riflescope tube to the picatinny base is 0.74 inches (18.7 mm).

With mountings screws on the base and four screws on each side of the two scope rings. It will hold the riflescope mount securely.

Precision machined from aluminum alloy with anodized black matte finish. Light weight, only 2.46oz/70g.

Easy to install. Note: the rings have a star nut for installation rather than a hex nut and the tool is included.